Missing module on SOPC builder need expert help

Question

This file was build on earlier version of Quartus II software. I am working on Quartus 9.1 and I am getting two of the modules missing. I was planning to remove it and use the onchip RAM instead, However, I am not sure if thats a good idea. Hence, please reply how could i able to retrieve the missing module. Here is the file

http://dl.dropbox.com/u/6307695/altera/control_nios.sopc

altera_forum · Answer

they look like custom components that someone created. you'll want to look around the project archive for some .v or .vhd sources as well as a _hw.tcl file that defines the component

altera_forum · Answer

Thanks a lot for the reply. I looked at the verilog code. line no 584 and 647 is used to call those modules. However, I dont know how would i be able to generate the SOPC builder without those missing modules. Here is the verilog file.

http://dl.dropbox.com/u/6307695/my/lockin.v

Forum Discussion

Missing module on SOPC builder need expert help

2 Replies

Recent Discussions

Duplicate_hierarchy_depth / duplicate_register

how to reduce clock skew between synchronous clock

Quartus - Users getting license Notification with new license applied

Quartus messages web search goes to Intel

Is Quartus Prime Pro 22.4 Compatible with Stratix 10 NX Series Device 1SN21CEU2F55E2VG?