Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Max+Plus II to Quartus, EPM7192

Hi, I have an old design that uses an EPM7192SQC160-10 and used Max+Plus II software to compile and program the device. I would like to do the same using the Quartus II tool. When I compile the...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Hi Tricky,

Thanks for the reply, but I found out that I didn't have the .pin file in my project and I needed to manually assign the pins to the proper functions. After doing so, my code compiled and the device was able to work.

Thanks again!