Help Quartus II 13.1 and Modelsim altera

Question

Hello,

I'm a new user of FPGA and Quartus, I begin with the VHDL programmation and I'm getting started with Quartus. First, I installed Quartus II 13.1 Web Edition (+ the update 13.1.4.182), I add the Cyclon III devices (this is the family of my device) and ModelSim-Altera. After created a little VHDL file, the compilation is OK (no errors), then I would like to simulate the file but with the command "Tools - Run simulation tool - RTL simulation" I have an error. This message is about the path of ModelSim-Altera software, he said he doesn't find it but for me the configuration is OK. Everyone can help me to launch this software ? I join screenshot file with the error and the configurations.

altera_forum · Answer

I think it cause for u haven't do the correct setting:

IN QUARTUS menu----options----general---EDA Tools Options---Modelsim----choose the Modelsim installation directory .

Hope it can solve your issuse !!!

altera_forum · Answer

This is the screenshot number 3 (Tools_options), I check again the path, it's good. here is the path of my windows explorer : C:\altera\13.1\modelsim_ase\win32aloem, I don't understand ?!

altera_forum · Answer

--- Quote Start ---

This is the screenshot number 3 (Tools_options), I check again the path, it's good. here is the path of my windows explorer : C:\altera\13.1\modelsim_ase\win32aloem, I don't understand ?!

--- Quote End ---

RE:

please add"\" at the last of "C:\altera\13.1\modelsim_ase\win32aloem"

the correct path is C:\altera\13.1\modelsim_ase\win32aloem

altera_forum · Answer

Ho! Thank you very much!  It's not cool because the default value is not with the last "/" and when we select the path, the "/" is not add. Than you for your help, it works now!

Forum Discussion

Help Quartus II 13.1 and Modelsim altera

4 Replies

Recent Discussions

Failing IO buffer

How-to generate dual-port (read/write) RAM with clock enables

Problem with wire level expressions in platform designer quartus pro 25.1

Quartus Pro 25.3 Not showing HPS IO in Pin Planner

Hard reset with USB-Blaster and Quartus