Forum Discussion

Woodchuc's avatar
Woodchuc
Icon for New Contributor rankNew Contributor
2 years ago

Generating RBF file for Cyclone iii using Quartus ii 13.1 web edition

Hello all, I would like to generate a raw binary file to load on an EPCQ16 for programming a Cyclone iii (EP3C40) using Quartus ii version 13.1 Web Edition on an Ubuntu 22.04 PC. Quartus ii runs t...
Hdl
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 years ago
Hello,
.sof should be always generated, .rbf generation has to be enabled in device configuration. Check messages of final assembler stage. All messages are also dumped in respective .rpt files. Newer Quartus versions have options to skip assembler stage, I believe that's not provided in Quartus 13.