Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

FPGA Design Transfer to PCB

Sir,

I would like somebody to guide me that i am using Altera Stratix EP1S80B956C6 development kit for my design. i have finalised the stuff. now need to transfer the code to an eeprom and develop a standalone PCB for the purpose. do we have an option of programming kits with eeproms pluged in on some base so that we can program them and solder them to PCBs for further distribution.

THX

1 Reply

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    18 years ago

    There is a good overview of configuration for Stratix devices here:

    http://www.altera.com/literature/hb/stx/ch_13_vol_2.pdf

    Take a look at the literature section of the Stratix product page on the Altera website and you can find a lot of useful whitepapers and app notes for transfering your design to a PCB.

    There is a lot to take care of, so I don't think anyone can just guide you through it. Luckily there is plenty of good literature available from Altera.

    Regards,

    Tyler