Error: (vcom-11) Could not find

Hello sstrell-san,

Sorry, I understood about the mean of SPACE in the file path.
I changed the path as your support and show .do as the bellow.
-----------------------
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/serial_tx.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/serial_rx.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/heartbeat.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/crc16_ser.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/cpld_lib/cpld_pkg.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/cpld_top.vhd}
-------------------------
After re-created a New library, although I executed .do, but error is same.
# ** Error: (vcom-11) Could not find cpld_lib.cpld_pkg.

Best regard

Yasushi Niho