Forum Discussion

Niho's avatar
Niho
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Error: (vcom-11) Could not find

Hello, I am trying to do RTL simulation under Questa Intel Starter FPGA Edition-64 2021.2 & Quartus Prime V22.1 Build 917 Lite edition. Device is MAXII cpld. But when run_msim_rtl_vhdl.do runs, vco...
Simulation
  • Niho's avatar
    Niho
    3 years ago

    Hello sstrell-san,

    I didn't use Nativelink and ran the .do developed 10 years ago and it compiled successfully.

    Thank you for your support.

    Best regard

    Yasushi Niho

sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
3 years ago

Can you change the file path to remove the space (even just make it "PTST_CPLD") and see if that works?

Niho's avatar
Niho
Icon for New Contributor rankNew Contributor
3 years ago

Hello sstrell-san,

Sorry, I understood about the mean of SPACE in the file path.
I changed the path as your support and show .do as the bellow.
-----------------------
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/serial_tx.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/serial_rx.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/heartbeat.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/crc16_ser.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/cpld_lib/cpld_pkg.vhd}
vcom -93 -work work {C:/Users/NIHO-PC3/SCST2/PTST_CPLD/trunk/src/cpld_top.vhd}
-------------------------
After re-created a New library, although I executed .do, but error is same.
# ** Error: (vcom-11) Could not find cpld_lib.cpld_pkg.

Best regard

Yasushi Niho

  • Niho's avatar
    Niho
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hello sstrell-san,

    I didn't use Nativelink and ran the .do developed 10 years ago and it compiled successfully.

    Thank you for your support.

    Best regard

    Yasushi Niho