Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

EPM7128SLC84-15 - Quartus 2 13.0.1 SP1 Web - Programming Probem - no JTAG ID

Hello Altera-Profis,

I want to program a EPM7128SLC84-15 in a university project. I have already programmed it on a computer in the university.

Now I want to work with the Board on my own Computer.

But every time I want to load the Project on the chip I get following Message: 

Error (209001): JTAG ID code specified in JEDEC STAPL Format File does not match any valid JTAG ID codes for device

I use following Quartus Version:

13.0.1 Build 232 06/12/2013 SP 1 SJ Web Edition

I can not match the right CPLD in the Programmer, so I think i need some JTAG ID codes for my CPLD or?

In the Programmer is the Device: EPM7128SL84.

So it is the wrong device which is deteced.

I hope you can help me.

best greets Lennart

7 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    11 years ago

    What is the prgramming file exactly ?

    I have found in the Compilation Repot in the Assembler Setting following Option:

    "Generate a JEDEC STAPL Format File (.jam) for Target Device | Off"

    Is that the wrong Setting? How can I change it?

    Thank you for replying.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    11 years ago

    I meant the Quartus II file that tells it how to program the device.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    11 years ago

    Hm.. is this the .pof file?

    In the Programmer, the .pof file is listed and there I checked "Program/Configure"

    Are there more files to "install" ?
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    11 years ago

    Oh..yes I have installed all Device Familys during installation. But I am not sure because in the programmer I have no option for "EPM7128SLC84" but "EPM7128SL84". Although it works in university with the option " EPM7128SL84" too.