Forum Discussion

reza5961's avatar
reza5961
Icon for New Contributor rankNew Contributor
2 years ago
Solved

EP1K50TC144

Hi,please help me how can I read ep1k50tc144 and write to another ?and which quartus support for this chip? (I have biteblaster and quartusii 4.1)
Hdl

9 Replies

  • FvM's avatar
    FvM
    Icon for Super Contributor rankSuper Contributor
    2 years ago

    Hello,

    EP1K50 (ACEX1K series FPGA) has no internal configuration memory. If not configured by an external uC, it might use a dedicated configuration device like EPC1. In this case, there should be a related programming connector, review the circuit schematic.

    Regards,

    Frank

    • reza5961's avatar
      reza5961
      Icon for New Contributor rankNew Contributor
      2 years ago
      Dear FvM:
      Thank you very much for reply,yes the beside of ep1k50tc144 is EPC2L chip.so configuration is inside of this ic.
      Best regards.
  • FvM's avatar
    FvM
    Icon for Super Contributor rankSuper Contributor
    2 years ago

    Hello,
    if a JTAG connector for EPC2 programming is provided on your board, you can extract a .pof file with Quartus programmer "examine" function and save is to another device.

    Regards,
    Frank

  • reza5961's avatar
    reza5961
    Icon for New Contributor rankNew Contributor
    2 years ago
    Again thank you very much for reply,sorry can you detail more for this job?and whis version of quartus support?I have version 1 and 2.
  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    Sorry for the delay. Can you explain on what do you mean by the version of Quartus support. What do you mean by Version 1 and Version 2. The example for Quartus software is "Quartus Standard Version 22.0".


    Best Regards,

    Nazrul Naim


    • reza5961's avatar
      reza5961
      Icon for New Contributor rankNew Contributor
      2 years ago

      That's mean in menu of top of software written version 4.2.

      How to read epc2 with jtag?

      (I don't find read option in menu of software)

  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.


    Regards,

    Nazrul Naim