Forum Discussion
reza5961
New Contributor
New ContributorEP1K50TC144
Hi,please help me how can I read ep1k50tc144 and write to another ?and which quartus support for this chip? (I have biteblaster and quartusii 4.1)
Hello,
For this request we advise you to use the latest version of Quartus and you can follow the guidelines that will be provided in the link below.
Hope that answers your question.
Best Regards,
Nazrul Naim
FvM
Super Contributor
Super ContributorHello,
EP1K50 (ACEX1K series FPGA) has no internal configuration memory. If not configured by an external uC, it might use a dedicated configuration device like EPC1. In this case, there should be a related programming connector, review the circuit schematic.
Regards,
Frank
reza5961New Contributor
New ContributorDear FvM:
Thank you very much for reply,yes the beside of ep1k50tc144 is EPC2L chip.so configuration is inside of this ic.
Best regards.
Thank you very much for reply,yes the beside of ep1k50tc144 is EPC2L chip.so configuration is inside of this ic.
Best regards.
