Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Enabling Avalon MM Transfers with Flow Control

I'm new to FPGA development so be gentle. I have a question about how to enable flow control transfers between Avalon MM components. The following passages from the Quartus II 8.0 Handbook...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Brad is correct. Flow control in Avalon is determined by the physical signals the interface supports. Note however that you can get problems by connecting slaves that support flow control to masters that do not.