Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Domain crossing of related clocks

I have been trying to figure out how to constrain a path of data between a 100MHz clock and a 25MHz clock that is generated by counter driven by the 100MHz clock. I have tried #set_mult...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Sounds like it would be much easier if you drove everything off the 100MHz clock and use the 25Mhz generated clock as Enables to those registers you want to be in the 25MHz domain. :)

Cheers,

Thean Charn