Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Diagnosing "signal was determined to be a clock .." message.

After incorporating a number of files produced by colleagues, I now get a warning from TimeQuest saying a signal "was determined to be a clock but was found without an associated clock assignment." T...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

If your reporting from that clock, then look at any of the source registers and see what clocks it. Basically whatever that is should be directly from the reset in question. Make sure to do report_timing -detail full_path to get the clock tree path broken out.