Honored ContributorCould you help me, please?
I have downloaded the programm to the FLASH.But i want the program is working when i turn on the power source.So i hope the program is called to the RAM from the falsh if only i turn on the power soource.I don't kown how to do it!! Please the master-hand help me!!!! Thank you in advance!!!!
Honored ContributorFirst: a flash must be programmed, a nios2-download won't help.
second: the reset address for the nios2 must point to flash, at that address there must the entry point of your program.Honored ContributorCould you tell the way in detail?
I'm so sorry,i touch the DE1 boards right now.So i can only program on line. Thank you for your replay! It's very kind of you……Honored ContributorI am sorry but teaching you all the way in detail is quite long: it seems that not only you have just touched right now the board but I fear you have not so much confidence with the tools. Am I right?
You should follow some tutorials to start taking some confidence with the tools. Have a look at http://www.altera.com/education/univ/software/unv-software.htmlHonored ContributorYes ,you are right!
I'll study harder and harder! Thank you for your sincere advice!
