Forum Discussion

Honored Contributor

15 years ago

CPLD PFL vs NIOS FLASH Programmer

Hi, I encounter a problem to configure a EPS2180 on a custom board with the NIOS Flash Programmer. Here is the Hardware config : - FPGA configured at power up by a MAX2 CPLD including a ...

Altera_Forum

Honored Contributor

15 years ago

Well, the problem could be a sof2flash bug in EDS 9.1. Check al least this thread for more information: http://www.alteraforum.com/forum/showthread.php?t=22441

I managed to get a working flash file with EDS 9.1 SP2 with the additional option --programmingmode=FPP.

Good luck, Ton

Forum Discussion

CPLD PFL vs NIOS FLASH Programmer

Recent Discussions

Quartus 20.1std compilation fails for Quartus map - Device 10AS057K2F40I1SG

Is Quartus Prime Pro 22.4 Compatible with Stratix 10 NX Series Device?

Timing analysis - long combinational path

QuartusPro 25.3 Crashed after using the Signal Tap Logic Analyzer

Duplicate_hierarchy_depth / duplicate_register