Forum Discussion

TuckerZ's avatar
TuckerZ
Icon for Occasional Contributor rankOccasional Contributor
3 years ago
Solved

Are Unpacked Array Supported in Platform Designer's Component Editor?

Hello, I'm trying to design an Avalon MM Slave and turn it into a component for use inside of platform designer using the component editor. In my top level HDL file, I have these two ports which ...
Platform
  • RichardT_altera's avatar
    RichardT_altera
    3 years ago

    May I know which version of Quartus are you using, Standard or Pro?

    I'm afraid that if you are using Quartus Standard, there is limited support for the System Verilog language.

    Link: https://www.intel.com/content/www/us/en/docs/programmable/683283/18-1/verilog-and-systemverilog-synthesis-support.html

    The recommendations are as follows:

    1. Upgrade to Quartus Pro.
    2. Modify the design code by converting the multidimensional arrays into single-dimensional arrays.

    Unfortunately, the engineering team has no plans to enhance Quartus Standard.

    We apologize for any inconvenience caused by the limitations of the tool.

    Best Regards,

    Richard Tan

    Edited: Platform Designer does not support 2D arrays.

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

I regret to inform you that the engineering team is unable to provide support for enhancement requests for Quartus Standard.

Therefore, I must inform you that the request for SystemVerilog support in Platform Designer has been rejected.


However, please note that if you have an enhancement request for Quartus Pro, we would be more than happy to assist you.

Feel free to reach out to us with any such requests or any other inquiries you may have.


Thank you for your understanding in this matter.

If you have any further questions or require additional assistance, please do not hesitate to let us know.


Best Regards,

Richard Tan