About TimeQuest Unconstrained Paths

--- Quote Start ---

https://www.alteraforum.com/forum/attachment.php?attachmentid=8489 https://www.alteraforum.com/forum/attachment.php?attachmentid=8490

I want to synchronize the clock"in"to the clock"clk",and get the clock trigger the data.

But after compiled ,the Report give the hint as shown in figure . "inst" is not a base clock, how to deal with it?

--- Quote End ---

you must have connected inst to the clock port of a register either directly or by inference.

sorry,I can't understand what's your meaning .

can you tell me details ? in figure, "in" is a 10MHz clock , "clk" is a 320MHz clock, I want to get a synchronize clk to trigger the data, so...

this program is normal in Classic Timing Analyzer, but in TimeQuest , it gives the warning.

why?

--- Quote Start ---

sorry,I can't understand what's your meaning .

can you tell me details ? in figure, "in" is a 10MHz clock , "clk" is a 320MHz clock, I want to get a synchronize clk to trigger the data, so...

this program is normal in Classic Timing Analyzer, but in TimeQuest , it gives the warning.

why?

--- Quote End ---

your picture includes a node called "inst" but you haven't told us anything about it.