Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

A problem with Quartus Programmer v10.0

Anybody understand this error code???

Internal Error: Sub-system: PGMWQ, File: /quartus/pgm/pgmwq/pgmwq_device_dlg.cpp, Line: 343

Invalid Initial family

Stack Trace:

0x5aaea: pgmwq_select_hardware_and_close + 0x8baa (pgm_pgmwq)

0x635d0: pgmwq_select_hardware_and_close + 0x11690 (pgm_pgmwq)

0x276c35: QWindowsXPStyle::styleHint + 0x2d5 (QtGui4)

End-trace

I was trying to change the frequency properties of an EEPROM device, but this message came up and the program stopped.

6 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    usually there isn't enough information in the trace to gather any useful information. though yours does say Invalid Initial family

    can you provide steps to reproduce this and/or file an SR?
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    --- Quote Start ---

    usually there isn't enough information in the trace to gather any useful information. though yours does say Invalid Initial family

    can you provide steps to reproduce this and/or file an SR?

    --- Quote End ---

    well basically i plug in the usb blaster, atuo detect the device, and then double click on the device properties and thats when it crashes.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    hm, i just tried the same on Windows and 10.0 and didn't get a crash. i am targeting an AIIGX, which device were you trying to use?

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    --- Quote Start ---

    hm, i just tried the same on Windows and 10.0 and didn't get a crash. i am targeting an AIIGX, which device were you trying to use?

    --- Quote End ---

    I wish i could answer that confidently!! I Dont know a lot about the device itself only that its An EEPROM(EP20K1000EFC672).
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    it still shouldn't have an Internal Error, so file an SR if you can