Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
22 years ago

What's wrong with the Flash-programmer?

I use flash-programmer to download the sof+elf files to the EPCS4(ref=U13), the actual project is called dl900, and my own target board called dl900_200, I use mk_target_board command to create it; ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
22 years ago

I thought I had already posted about this problem. We are doing the same in our design. In fact, all we had to do was insert a PIO and have the out put go to a virtual pin. That fixed everything. Altera is aware of this problem and the fix because we were on the phone to them with our FAE as we fixed it.