Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Using EPCS on power up for uClinux

Hi, I have problems using the epcs as the boot device for the zimage file made with uclinux - the SW . i have followed the instructions here : http://www.nioswiki.com/operatingsystems/uclinu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi,

it's working now !

found the problem; when using the ptf on linux ( make vendor hwselect ), I chose executing from the epcs and not from the sdram ( of-course...)

Bless you all :-)

Erez