Using Epcs for PowerUp and for WR/RD

Question

Hi,

Is there any problem Using Epcs for PowerUp ( I am storing the sof and the zimage on my epcs64 ) and for writing and reading Data?

of-course when using different addresses.

How to do it?

one more,

must the Epcs be deleted completly before writing to one address/bank?

Thanks,

Erez

altera_forum · Answer

No, not completely, but the sector that you want to write to must be erased.  See the EPCS handbook to see how big are the sectors and how are the sectors organized.

altera_forum · Answer

Please check section 3. on the wiki  http://nioswiki.com/operatingsystems/uclinux/flashprogrammer  - Hippo

Forum Discussion

Using Epcs for PowerUp and for WR/RD

2 Replies

Recent Discussions

NIOS V/m dbg_reset_out signal (Q25.1 Std, MAX10)

NiosV and juart-terminal

licensing.altera.com never worked

JTAG_UART stuck in printf

Ashling IDE scripted project creation