Forum Discussion

New Contributor

5 years ago

Use 3rd Party Terminal for JTAG-UART IP

Hello! I have a MAX10 with a NIOS2 core. I tested both JTAG-UART (USB Blaster from Terasic) and UART IP (a common RS232 to USB adapter) an they work great. I can communicate between NIOS and PC...

Eliath_G_Intel

Occasional Contributor

5 years ago

Hi Paul,

Thanks for reaching us,

regarding your question...

you would need to recreate the Jtag - UART architecture independently , please take a look at the following document, page 2 to see how it is constituted.

https://www.intel.cn/content/dam/www/programmable/us/en/pdfs/literature/hb/nios2/n2cpu_nii51009.pdf

Regards,

Forum Discussion

Use 3rd Party Terminal for JTAG-UART IP

Recent Discussions

Nios-V on Cyclone IV

University Program IP for NiosV

Nios II IDE File Name too long error

Unable to load Ashling Riscfree NiosV libraries

Correct way to use mSGDMA with a NIOSV/m processor on a MAX10 FPGA