USB in Altera UP3 board

Hi,

I urge the experts of Altera to let me know of the feasibility.

I have a JTAG and a USB masterblaster port in my UP3 FPGA Board. I use the JTAG only. Is it possible to configure the materblaster port for use as an USB port.

The master Blaster port has a USB 1T11A transreceiver ( from fairchild) connected to the FPGA.

I have compiled the opencore USB core and interfaced it with the Nos II using the SOPC builder. The other option of using a santacruz connector is not desireable

Thanks in advance

Shashwat

sraizada@cse.iitk.ac.in