Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

uClinux USB3.0 host controller driver

Hi, For our new project we are using stratix iv FPGA with nios processor. And on pci bus we are connecting USB3.0 host controller(TIUSB7320). As per my understanding linux kernel 2.6.35 an...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Hi,

I havesome questions on USB too:

in our embedded card we have a USB2 Highspeed OTG device IP license for encrypted netlist for one nodelocked ALTERA system NIOS2 FPGA.

uClinux is the OS and it manages several interfaces such as Ethernet, UART, I2C, SPI etc.

Is it possible to use the USB Device Drivers available in the uClinux distribution (Linux nios2 2.6.34-00692-g5bc7853-dirty) to manage the IFI USB2?

If yes, is there any particular requirement or attention to setup properly the device driver itself? Does it exist any Configuration Guide?

If it is not possible to use the USB Device Driver from our uClinux distribution, where may I find a Linux Device Driver?

Agostino