Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Uclinux on DE0-NAno

Sir, Iam trying to download zimage into DE0_Nano's SDRAM, but i failed to load , 1.alex@alex:/$ jtagconfig 1) usb-blaster [7-1] 020f30dd ep3c25/ep4ce22 2)alex@alex:/$ killall ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

From (3), it indicates that you do not have a suitable processor present on the DE-0 Nano.

Ensure you have either pushed in the .sof or the .jic with your processor (with jtag access) into the DE-0 Nano. (if you used .jic, be sure to power-cycle the board) Until you can get the nios2-download (or nios2-terminal) command to function, don't worry about your Linux issues.