UCLinux build errors with DE2 Board 2C35.

Hi,

I installed the Nios II Linux v1.4 released.

System : XP, quartus v51, nios v51.

Board : DE2 with 2C35.

I do exactly what is say in the microtronix “Quick Start Quide.pdf” but I’ve got some errors when i build my linux kernel.

/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x/drivers/ide/ide.c: In function `init_hwif_default&#39;:
/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x/drivers/ide/ide.c:262: error: `na_ide_ide&#39; undeclared (first use in this function)
/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x/drivers/ide/ide.c:262: error: (Each undeclared identifier is reported only once
/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x/drivers/ide/ide.c:262: error: for each function it appears in.)
/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x/drivers/ide/ide.c: In function `init_ide_data&#39;:
/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x/drivers/ide/ide.c:313: error: `na_ide_ide_irq&#39; undeclared (first use in this function)
make: ***  Error 1
make: ***  Error 2
make: ***  Error 2
make: ***  Error 2
make: Leaving directory `/cygdrive/c/altera/kits/nios2_51/bin/eclipse/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x&#39;

Does Nios II Linux v1.4 support DE2_Board ?

I think that my kernel configuration is good. Maybe one problem with the *.ptf but i don’t know exactly. http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/blink.gif

Could u help me,

Thanks!

12 Replies

Altera_Forum
Honored Contributor
19 years ago
hi,

whiche .ptf do u use ?

the hardware configuration of your kernel must match the content of the .ptf used, if not problem with drivers will occur.

see also :

http://forum.niosforum.com/forum/index.php...ic=3667&hl=2c35 (http://forum.niosforum.com/forum/index.php?showtopic=3667&hl=2c35)

http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/wink.gif
Altera_Forum
Honored Contributor
19 years ago
I used diferent PTF, for exemple:
The Altera exemple "std_2C35.ptf" or the "nios_0.ptf" provide in the DE2 demonstration. Finally I tried with a personal ptf and each time it's the same error. http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/sad.gif

For the other section of this forum, i 've already see it. But the iriver problem's come when he want run linux. Me, i've a problem for build it.
Altera_Forum
Honored Contributor
19 years ago
hi,

back to kernel configuration :

did u "Turn off: Device Drivers -> ATA/ATAPI/MFM/RLL support" as indicated in the quick start guide when configuring kernel ? http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/rolleyes.gif
Altera_Forum
Honored Contributor
19 years ago
Hi pairin20,
please check this topic out:
http://forum.niosforum.com/forum/index.php?showtopic=3871 (http://forum.niosforum.com/forum/index.php?showtopic=3871)
Altera_Forum
Honored Contributor
19 years ago
Hi pairin20,
I think you need to remove IDE support from your kernel configuration. It can be found at:
Device Drivers --->
ATA/ATAPI/MFM/RLL support --->
< > ATA/ATAPI/MFM/RLL support
Altera_Forum
Honored Contributor
19 years ago
sdhnain and MFM, u are brilliant !!! http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/tongue.gif
Thanks!
Altera_Forum
Honored Contributor
19 years ago
I 'd like build my system with a DE2 exemple ptf, i use the one named "nios_0.ptf" of DE2_NET application. And i've again some driver error when i build my kernel.

make: *** Error 1 make: *** Error 2 make: *** Error 2 make: *** Error 2 make: Leaving directory

What can i do ? http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/sad.gif
Altera_Forum
Honored Contributor
19 years ago
--- Quote Start ---
originally posted by pairin20@May 14 2006, 10:20 PM
i 'd like build my system with a de2 exemple ptf, i use the one named "nios_0.ptf" of de2_net application. and i've again some driver error when i build my kernel.

make: *** error 1 make: *** error 2 make: *** error 2 make: *** error 2 make: leaving directory

what can i do ? http://forum.niosforum.com/work2/style_emoticons/<#emo_dir#>/sad.gif
<div align='right'><{post_snapback}> (index.php?act=findpost&pid=15356)</div>
--- Quote End ---

DE2 has different hardware from the Altera's Nios II 2C35 dev board.
For Eithernet DE2 uses DM9000, while Altera's Nios II dev board use SMC91111.
You have to check only what is available to your board in kernel config.

Another advice, work on Linux and follow the buildroot guide,
http://forum.niosforum.com/forum/index.php?showtopic=3174 (http://forum.niosforum.com/forum/index.php?showtopic=3174)
Altera_Forum
Honored Contributor
19 years ago
make: *** Error 1 make: *** Error 2 make: *** Error 2 make: *** Error 2 make: Leaving directory

http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/unsure.gif http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/blink.gif http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/mad.gif http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/sad.gif
Altera_Forum
Honored Contributor
19 years ago
--- Quote Start ---
originally posted by pairin20@May 14 2006, 10:07 AM
make: *** error 1 make: *** error 2 make: *** error 2 make: *** error 2 make: leaving directory

http://forum.niosforum.com/work2/style_emoticons/<#emo_dir#>/unsure.gif http://forum.niosforum.com/work2/style_emoticons/<#emo_dir#>/blink.gif http://forum.niosforum.com/work2/style_emoticons/<#emo_dir#>/mad.gif http://forum.niosforum.com/work2/style_emoticons/<#emo_dir#>/sad.gif
<div align='right'><{post_snapback}> (index.php?act=findpost&pid=15359)</div>
--- Quote End ---

hi parinin20

Do you have to modify two places in dm9000x.c ?
if not , you should be modified its ,as such following:

include/nios2_system.h
.
define na_DM9000A
define na_DM9000A_irq
.

/drivers/net/dm9000x.c:305: error: `na_dm9000_irq' undeclared here (not in a function) "na_dm9000_irq" update to "na_DM9000A_irq"

drivers/net/dm9000x.c:162 # define DM9000_MIN_IO (na_dm9000) "na_dm9000" update to "DM9000A"

Hope to help you ! http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/smile.gif

jay

Forum Discussion

UCLinux build errors with DE2 Board 2C35.

12 Replies

Recent Discussions

SDRAM NIOSV ash-riscv-gdb-server error

How to properly register a custom PHY (Analog Devices ADIN1300) in TSE driver

Address Space?

NIOSV firmware stuck when juart-terminal is not open for the print messasges.

How to reduce ROM/RAM requirements for a NIOSV Compact CPU Platform?