Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

uClinux Boot problem

Hi, I am testing my own custom board with EP1C12Q240, Flash=16bit*4M, Sdram=32bit*2M. My system has NiosII/f Core, uart, jtag-uart, sdram, flash, epcs_controller, timer and some PIOs. I use...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

Hi LiangYi,

It seems to have problems in MTD.

It should be easier if you follow my buildroot guide,

http://forum.niosforum.com/forum/index.php?showtopic=3174 (http://forum.niosforum.com/forum/index.php?showtopic=3174)

It does not need romfs, ramdrive, cfi, or mtd to boot.

tschmelcher had a post about u-boot to be used with it,

http://forum.niosforum.com/forum/index.php?showtopic=3253 (http://forum.niosforum.com/forum/index.php?showtopic=3253)