Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributoruboot uclinux boot
hi all, I am tring to boot uclinux-1.3 from u-boot-1.1.3 on altera 2s60 board. I can download and boot uboot on the board sucessfully and also uclinux-1.3 by directly downloading into sdram ...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- Hello,currently I am working on porting uclinux and uboot on my Cyclone board and I ported uClinux and uboot on Samsung'44b0 board some time ago. I have a question to ask, before uploading our kernel image to the board, we must build a niosCPU and download it to the board? Or can you give me some detailed file on porting uclinux to nios board? Thank you in advance my e-mail is : [email protected] hi scut, Till now I have worked on 1s40es and 1s60es development kits, which comes along quartus and nios ide software cds. We have build our niosCPU (fpga image file OR .sof) file through quartus-II 4.2 and for compiling my linux I have used same installation in linux system or we can build our linux with nios ide s/w. thanks Ankur
