Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

U-Boot v2 aka Barebox

Hello, I'm inviting you to try this wonderfull bootloader named Barebox (here (http://barebox.org)). I added the nios2 arch to the project some times ago and now, we have some nios2 drivers ava...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Hi,

I solve this issue.

As describe in my first, PHY Init is required now (or default register is not correct). I look inside TSE driver, and found some registers to set. I complete barebox TSE driver, and now, it's Ok.

I also change uncache address base, since the default value don't match our design (or change with Cyclone V).

Regards,

Christophe