U-Boot for Stratix II

Hi MFM,

> I sent you a PM with no reply

Sorry for the delay ...

... but please be patient -- I don't get paid for my participation on the forum -- and I often

get bogged down doing the _other_ stuff that let's me & the family eat ;-)

I'll always do my best to respond though.

> I'm wondering if I could use my usb blaster, instead of the serial cable, and the

> flash programmer to program u-boot

Yes. You can use the JTAG UART as the u-boot console and the flash programmer to

program u-boot into flash. Until you have your flash driver working, the flash programmer

is the best bet. Once you have your flash driver working, the u-boot tftp and flash

programmer is much faster.

Regards,

--Scott