Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

U-Boot : 'make' problem

Hello, I'm trying to compile a Uboot package in order to upload the .srec file to the NIOSII Cyclone board. My problem is that "make" command terminates with this message : (...) ma...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

Hi Scott,

thanks for the answers.

I have checked that include/configs/PK1C20.h uses the same addresses as those set in SOPC builder. I did not even build the example, I am smply using the pre-compiled SOF file I found in the example directory (1C20/standard). I did not put the SOF file in the EPCS, I upload it through uart just before uploading the srec file.

Anyway, I dont get anything on my uart.......