Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Tutorial Video: How to boot uClinux on NIOS II Processor with MMU

Hi everyone I record a tutorial video about how to boot uclinux on Nios II Processor with MMC I used DE2-115 as reference but you can use any board that you like Feel free to contact me if you...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

There is also an issue with eth0 interface. It works only in half duplex mode even when i write "ethtool -s eth0 autoneg off speed 100 duplex full ".