Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Tutorial Video: How to boot uClinux on NIOS II Processor with MMU

Hi everyone I record a tutorial video about how to boot uclinux on Nios II Processor with MMC I used DE2-115 as reference but you can use any board that you like Feel free to contact me if you...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Hi,

--- Quote Start ---

DE2-115 has leds, buttons etc.

Can i control them from linux?

--- Quote End ---

I've connected almost all DE2-115's peripheral devices including KEY[3..0] (KEY[0] is abused for the system reset), SW[17..0], LEDR[17..0], LEDG[8..0] and LCD, etc. except Ethernet 1, SRAM, Video decoder and IDE 40pins GPIO. But drivers are not included, so you can't use them from the linux side now.

If you have strong request, I will implement those drivers, but I can't imagine the those usage except for X'mas illuminations:confused:.

What is your purpose for?

Kazu