Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

TSE not transmitting in Cyclone V

I have a working design using the TSE core that is implemented in an Arria Gx II speed grade -5 which we implemented into Quartus 11.1 SOPC system. I have ported the design into a Cyclone V E speed g...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

I am using a NIOS connected to an on-chip Memory. From there I have connected a Scatter Gather DMA Controller(Transfer Mode:Memory-to-stream). The SG-DMA is then connected to the TSE. This configuration we have duplicated for both the Rx and the Tx.

We send the packets to the core via this SG-DMA

We have successfully initialized the TSE core registers

We have not checked the Rx yet we are focusing first on the Tx