Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

target processor: not responding

Hello, Actually, i am new user to NIOSII and Quartus. I was doing Altera tutorials to get used to them and in one of the tutorials, i stucked in the middle and i had this message in the c...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Hi Kamardino,

If you don't have a permanent Nios license and you are using it in Opencore evaluation mode, you should keep the USB Blaster connected to the board, otherwise all non licensed modules would be disabled.

If this is your case, simply don't close the programmer message box which appears just after you have configured your fpga.

Cris