Forum Discussion

AKaga2's avatar
AKaga2
Icon for New Contributor rankNew Contributor
6 years ago

sof2flash error with Cyclone 10 sof file

When I try to run sof2flash utility (ADS 18.1 Standard or Pro) with .sof of 10CL016YU256C8 device based project I get an error message: "foo:10A10CL016YU256C8G31/10/2019 14:50:25 - (SEVERE) sof2flash...
ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi AKaga2,

For current design, we recommend to use Quartus Prime Programming as programming method instead of NIOS II Flash Programming(sof2flash, elf2flash).

Quartus Prime Programming flow is used for combining a *.sof and a *.hex file into a single *.pof or *.jic file for programming into the configuration or booting device.

You may refer to following the link for more details:

https://www.intel.com/content/www/us/en/programmable/documentation/lro1432739743862.html

Thanks