Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

several questions about making my target board

I use mk command to generate a target board project. I open this project ,and open sopc from tools menu in quartus, but I found this system has included cpu_0, firmware_ROM, data_RAM, payload_B...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Not neccessary, you just add a tri-state bridge,your Flash.

The offset(address) will be ok after "auto assign".

Please look at the AN***.pdf under <nios>/documents.