Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

Serial Config - Cyclone vs. CycloneII

Hello,

We're updating a Cyclone I board to use Cyclone II.

On the Cyclone I board we needed one JTAG port for IDE work etc. and a separate port just to program the EPCS config device.

It looks like the C2+EPCS only needs the one main JTAG port. Is this correct?

Thanks,

Ken

1 Reply

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    --- Quote Start ---

    originally posted by kenland@Jan 14 2006, 11:08 AM

    hello,

    we're updating a cyclone i board to use cyclone ii.

    on the cyclone i board we needed one jtag port for ide work etc. and a separate port just to program the epcs config device.

    it looks like the c2+epcs only needs the one main jtag port. is this correct?

    thanks,

    ken

    <div align='right'><{post_snapback}> (index.php?act=findpost&pid=12198)

    --- quote end ---

    --- Quote End ---

    sure,use JIC file program epcs through cyclone fpga