Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorSDRAM does not retain data
I have a custom board with an altera EP1C12, a flash memory and a MT48LC4M32B2 SDRAM memory. Timings I set in SOPC builder are the default timings for this part. When I set the value 0x00000000 ...
Altera_ForumHonored Contributor
Honored ContributorWell, I tried with different phase-shifts for sdram with no success. Now I'm doing the tests on location 0 of the SDRAM, even if I'm quite sure that 43235 is in the range.
Now I'm waiting a reply from the altera support.... Cheers Marco
