Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Read/Write CFI flash

I am using a Cyclone III starte board for some initial design. I am using the CFI flash for configuration and code storage, but I'd like to use unused space for non-volatile storage. I have tried t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

I am using Nios-II simple socket server software application.

No DHCP server. Network settings are to be done statically.

I wish to store network settings like IP address & subnet mask in flash and want to read this IP address & subnet mask from flash for Nios-II simple socket server software application so that network parameters get configured.

Please tell me how to do this.