Forum Discussion

Fpga_Egr_2025's avatar
Fpga_Egr_2025
Icon for Occasional Contributor rankOccasional Contributor
14 days ago

Nios IDE CPU Detection

Hi, I am trying to create bsp and software for Nios V , using Eclipse IDE. When specifying a new projcet and its .sopc file i see message CPU not detected. And i also see message the NIOS_EDS enviro...
Nios Cpu
Fpga_Egr_2025's avatar
Fpga_Egr_2025
Icon for Occasional Contributor rankOccasional Contributor
12 days ago

Thanks for pointing that to me , yes i was able to generate bsp as per document "AN 985: Nios® V Processor Tutorial" , But now i am stuck on this step :     

See also attached my Niosv command console messages :   

Any idea why niosv shell cannot recognize these switches ? Thanks

tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
7 days ago

Hi Fpga_Egr_2025 

 

Could you try out the command format below:
niosv-bsp -c --quartus-project=top.qpf --qsys=sys.qsys --type=<hal, ucosii, or freertos> software/bsp/settings.bsp