Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorRAM and FLASH shared bus don't worked
Hello everyone, I developped my own custom board which have MT48LC16M16 (Micron SDRam), S29AL032D (Spansion Flash) and Cyclone III EP3C25. RAM and FLASH share data and address bus. The Flash me...
Altera_ForumHonored Contributor
Honored ContributorHi ,
When you program Flash or RAM , what bridge ip core are you using to access Flash or Ram . I have done it before and the Altera provides a core that creates a bridge during configuration to burn flash . I think you need to disable RAM or take the SDRam out and then try it .
