Forum Discussion
ZhiqiangLiang
Occasional Contributor
Occasional Contributorqspi driver in NIOS bsp in Cyclone 10
Hi, I am running NIOS II in Cyclone 10 LP 10CL120YF484. The flash I am using is M25P64 which is qspi interface. The problem is that EPCS flash controller is not compatible for Cyclone 10. I am go...
ZhiqiangLiangOccasional Contributor
Occasional ContributorThank you!
By default, Platform Designer set JTAG Debug mode. I have never set or changed it.
Let's go back to my question:
I followed the settings in your link pasted above, but I am still facing the issue that NIOS II Flash Programmer can't find the device.
Could you please tell me how to solve that issue?
If it is possible, could you please contact me by me personal email: [email protected]
Archer_AlteraOccasional Contributor
Occasional ContributorHi Zhiqiang,
Since you can download JIC file, one possible solution is to convert elf file into hex file, and then add hex file into JIC file.
There are detailed online descriptions for your reference as below.
https://www.intel.com/content/www/us/en/support/programmable/articles/000076639.html
