Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Problems when downloading onto EP1S10F780C6

Now, I am working on this board with Quartus 4.2 and Nios II IDE 1.1. After following the instruction from "Getting Start" document, I cannot download the "hello world" onto this board. The following...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

I ran the "re-generate" in SOPC Builder then ran the "start-complie" from Quartus II 4.2 "processing" menu.

Then I run the "start" from Quartus ---> Programmer.

Then I re-build the "Hello World" and tried to download it onto board. But I failed again and got the following error message:

Using cable "ByteBlasterII [LPT1]", device 1, instance 0x00

Pausing target processor: not responding.

Resetting and trying again: FAILED

Leaving target processor paused