Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Problem with "system ID" and "Timestamp" when debugging/running the system

I am using Quartus II/Nois II IDE v9.0 and I got this message when debugging or running my software on board: Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Pausing target process...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Make sure you don't have in you project directory another .sof file named XXXX_time_limited.sof, if you have one try loading it in the fpga.