Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

problem with cable and ecos applications

I have some doubts. I will apreciate if someone can help me... Is there any problem if I use ByteBlaster II cable to run ecos applications on the board? I couldn't get the "hello world" messag...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Hello maikon,

I tested the „hello world“ example from the eCos kit with my own hardware and with the ByteBlaster II cable without any problems. More information about the posted message of the Nios II IDE can be found under: http://www.niosforum.com/forum/index.php?a...&hl=byteblaster (http://www.niosforum.com/forum/index.php?act=st&f=2&t=438&hl=byteblaster)

For a running eCos system you need a proper Nios II FPGA configuration. After configuring the FPGA just follow the tutorial exactly.

For more help please give some more details about your hardware, software version, …

Bye,

niosIIuser