Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorProblem debugging on a custom cyclone board
Hi: This is just about getting us crazy. We have designed a custom board with a Cyclone chip for implementing a NIOS II processor, both the processor and the SDRAM seem to work ok (some impleme...
Altera_ForumHonored Contributor
Honored ContributorWe have the reset location pointing at internal ROM (0x00811000) and the exception address pointing at internal RAM (0x00811800 + 0x20).
In the system library project, program and data memory (.ro, .rw, etc.) sections are pointing at SDRAM (0x01000000).
