Forum Discussion

Honored Contributor

15 years ago

Problem about C code loading to Hardwave

When I load my C code to the Hardware, I got a message "Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Pausing target processor: OK Initializing CPU cache (if present) OK D...

Altera_Forum

Honored Contributor

15 years ago

There are various way to debug this, you can use system console, mem test, or writing your own mem test.

But i think the easiest way is to look at the example design, that proven to be working.

Download the ZIP file here:

ftp://ftp.altera.com/up/pub/de2/de2_system_v1.2.zip

The link above can be found in:

http://www.altera.com/education/univ/materials/boards/unv-de2-board.html?gsa_pos=3&wt.oss_r=1&wt.oss=de2

Forum Discussion

Problem about C code loading to Hardwave

Recent Discussions

NIOS SDK SBOM/FOSS info

JTAG_UART stuck in printf

Recommended Quartus Prime Standard Edition for Nios V Development on MAX 10 FPGA (10M25DAF4817G)

University Program IP for NiosV

NiosV µC/OS-II