Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

porting u-boot to my cyclone board

I can not access the web link given in the forum http://www.pysent.com/download (http://www.pysent.com/download) can anyone send the code to me? my email is: scut_ak@163.com Thanks ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Hi,MFM

We know that when we use the command "nios2-download -g u-boot" then it download the elf format image into sdram automatically and here the addess

0x1FC0000 was not assigned by me in the above command.

I mean where to specified this addess in the u-boot source code.

Thank you for your replay .

Warm Regard.

scut_ak

--- Quote Start ---

SOPC Builder]$ nios2-download -g u-boot

Using cable "ByteBlasterII [LPT1]", device 1, instance 0x00

Processor is already paused

Downloaded 98KB in 2.8s (35.0KB/s)

Verifying 01FC0000 ( 0%)

Verify failed between address 0x1FC0000 and 0x1FCFFFF

Leaving target processor paused

/cygdrive/c/u-boot-src/u-boot