Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorPausing target processor : not responding
Hi all !. I m stucked withe the following problem : My system is built with a NIOS II, JTAG UART, one AM29LV065D flash, and 2 IDT71V416S RAM. I am using Quartus 4.2 SP1, IDE 1.1. When I try ...
Altera_ForumHonored Contributor
Honored ContributorWE added a pull up on the CS of the flash and RAM and it works fine now. Thanks for your efforts.
